您当前的位置:首页>论文资料>热轧未退火材料锻制钢球热处理工艺试验

热轧未退火材料锻制钢球热处理工艺试验

资料类别:论文资料

文档格式:PDF电子版

文件大小:625.09 KB

资料语言:中文

更新时间:2024-12-23 14:53:36



推荐标签:

内容简介

热轧未退火材料锻制钢球热处理工艺试验 第37卷第6期 2016年12月
热处理技术与装备
RECHULI JISHU YU ZHUANGBEI
[J]. Jourmal of Materials Engineering and Performance,
2010, 19(9) : 1235 1239.
Vol.37,No.6 Dee,2016
·工艺研究·
热轧未退火材料锻制钢球热处理工艺试验
王云广12,卫峰",孙小东12,孙伟1,2
(1.洛阳LYC轴承有限公司,河南洛阳471039;2.航空精密轴承国家重点实验室,河南洛阳471039)
摘要:通过对热轧未退火材料锻制钢球进行热处理工艺试验,热处理后可以达到热轧球化退火材料加工出钢球的各项技术指标;由于原材料减少了次球化退火工序,可以达到降低生产成本的目的。
关键词:热轧未退火材料;锻制钢球;热处理
中图分类号:TG156.25文献标志码:B
文章编号:16734971(2016)06-0023-03
ProcessTestaboutHeatTreatmentof SteelBallForged
by Hot Rolled Un-annealed Material
WANGYun-guang2,WEI Feng',SUN Xiao-dong-2,SUNWeil,2(1. Luoyang LYC Bearing Co. , Ltd, Luoyang Henan 471039,China;
2. State Key Laboratory of Aviation Precision Bearings, Luoyang Henan 471039,China)
Abstract: Through the process test of heat treatment for steel ball forged by rolled unannealed material, the technical parameters of steel ball processed by the hot rolled spheroidizing annealed material can be a-chieved after heat treatment. Due to reducing once spheroidizing annealing opration for the raw material, the production cost can be reduced.
Key words:hot rolling un-annealed material ;forged steel ball;heat treatment 收稿日期:2016-07-21
作者简介:王云广(1962.11-),女,高级工程师,学士学位,主要从事轴承热加工技术研究工作。
联系电话:037964986891;E-mail:hnluyg@163.com
[6]Peng Q Z, Zhou H T, Zhong F H, et al. Effects of hom-
ogenization treatment on the microstructure and mechanical properties of Mg-8Li-3AI-Y alloy [J]. Materials & De-sign, 2015, 66: 566 574.
[7]
Chen Z Y, Dong Z C, Yu C, et al. Microstructure and properties of Mg-5. 21Li-3. 44Zn-0. 32Y-0. 01Zr alloy[J].Materials Science and Engineering: A, 2013, 559 651654.
[8]Agnew S R, Yoo M H, Tome C N. Application of texture
simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y [J]. ActaMateria-
lia,2001,49(20) ; 42774289 万方数据
Al-Samman T. Comparative study of the deformation be-[9]
havior of hexagonal magnesium-lithium alloys and a con-ventional magnesium AZ31 alloy [J]. Acta Materialia, 2009, 57(7) ; 2229 2242.
[10] Lin Y N, Wu H Y, Zhou G Z, et al. Mechanical and ani-
sotropic behaviors of Mg-Li-Zn alloy thin sheets [J]. Ma-terials & Design, 2008, 29(10) : 2061 2065.
[11】GorelikSS,金属和合金的再结晶【M].全健民译.北
京:机械工业出版社,1985.
【12]朱兴元,刘忆.金属学与热处理【M].北京:北京大学
出版社,2006.
上一章:电源占空比对TC4合金微弧氧化生物膜层性能影响 下一章:表面粗糙度对25Cr3MoA钢氮化层深度和组织的影响

相关文章

旋转式喷雾冷却装置在锻制钢球上的应用 材料及热处理工艺对大规格钢球压碎载荷的影响 热轧钢球毛坯质量问题及解决方法 YB/T 5221-2014 合金结构钢热轧和锻制圆管坯 YB/T 5137-2018 高压用热轧和锻制无缝钢管圆管坯 YB/T 5222-2014 优质碳素结构钢热轧和锻制圆管坯 退火温度对热轧基板热镀锌钢板力学性能和组织的影响 微铌处理550﹢MPa热轧带钢的工艺研究