
106
D01:10. 7672/sgjs2013130106
施工技术
CONSTRUCTION TECHNOLOGY
2013年7月上第42卷
第13期
地铁施工安全风险与致险工程参数关联研究
宫培松,据倩茜
(华中科技大学土木工程与力学学院,湖北武汉430074)
【摘要】针对地铁施工安全风险事件发生机理进行分析,找出工程参数与安全风险事件之间的关联。通过查阅规范,从规范条文中寻找线索,经过深人分析和归缩整理,将线索逐步推导为致险工程参数,最后得到致险工程参数与安全风险事件的对应关系,进雨开发地铁施工安全识别规则,为实现地铁施工安全自动识别系统打下基础。根
据所开发系统的实际应用情况,识别结果能够满足地铁施工安全管理的需要。【关键词】地铁;安全管理;风险识别;工程参数
【中图分类号】TU94
【文献标识码】A
【文章编号】1002-8498(2013)13-0106-05
AStudyonRelationshipofEngineeringParameters
and SafetyRisk on Metro Construction
GongPeisong,JuQianqian
(School of Cisil Engineering and Mechanics, Huazhong Unisersity of Science
and Technology,Wuhan, Hubei 430074, China)
Abstract: This paper analyzes the mechanism of occurrence of safety incidents on metro construction, and finds out the relationship between engineering parameters and safety incidents. This paper finds out clues from the clauses based on the investment on the rules, and deduces the clues to engineering parameters related to safety risk through deep analysing and concluding, and then gains the corresponding relationship between engineering parameters related to safety risk and safety incidents. The gain of this paper can make a foundation on the research and practice of the safety management on metro construction. According to the fact of system applying, the risk identification gets a satisfied result on safety management on metro construction.
Key words:metro; safety management; risk identification; engineering parameters
地铁施工安全事故频发,固然有岩土工程本身的复杂性和不确定性,岩土工程研究至今仍然缺乏足够准确性,在一定程度上还依赖经验]。但不可否认的是,地铁工程规模大、技术复杂,目前的管理能力难以达到完全控制安全风险的要求[2]。利用计算机技术,将专家经验结构化、系统化,开发地铁安全风险自动识别系统,将能够在一定程度上解决地铁施工安全管理存在的知识经验缺乏的问题。
风险识别 1
专家根据地铁施工图纸,对施工中可能存在的
安全风险,根据自身的专业知识和多年的实践经验
进行识别与判断,思维过程如图1所示。*十二五"国家科技支撑计划项目(2012BAK24B00)
【作者简介】宫培松,博士研究生,国家一级注册建造师,国家注册造价工程师,E-mail:taller1975@126.com
【收稿日期】2012-11-20 万方数据
施工图纸专家知识与经验
读取
工程参数
识别判断
风险识别结果
图1人工风险识别过程
Flg.1
Process of artificial risk identification
根据图1,开发地铁安全风险自动识别系统的核心是,专家利用其自身掌握的知识与经验对从施工图纸中读取的工程参数进行分析和判断,从而识别出风险。根据施工图纸识别地铁施工安全风险的知识与经验的实质,就是工程参数与风险事件之间的关联。地铁安全风险自动识别系统的开发,量大的难点在于如何将这种复杂的关联结构化,成为计算机能够掌握的知识。