您当前的位置:首页>论文资料>Shell粉煤气化原料煤混配石油焦工业试验过程分析

Shell粉煤气化原料煤混配石油焦工业试验过程分析

资料类别:论文资料

文档格式:PDF电子版

文件大小:409.62 KB

资料语言:中文

更新时间:2024-12-11 10:50:51



推荐标签:

内容简介

Shell粉煤气化原料煤混配石油焦工业试验过程分析 2013年10月
化肥工业
Shell粉煤气化原料煤混配石油焦
工业试验过程分析
程更新,盛新,朱林军
(中国石化股份有限公司安庆分公司安徽安庆246001)
摘要介绍了Shell粉煤气化装置原料煤混配石油焦工业试验过程,对装置混配石油焦前、后有关工艺运行情况进行分析。试验情况表明Shell粉煤气化原料煤混配石油焦在技术上是可行性的,同时对Shell粉煤气化原料煤混配石油焦的工业应用提出建议。
关键词Shell粉煤气化混配石油焦工业试验
AnalysisofIndustrialTestsonShellPulverizedCoalGasification
of Coal Feed Mixed with Petroleum Coke
Cheng Gengxin, Sheng Xin, Zhu Linjun
(SINOPEC Anqing Company Anhui Anqing 246002)
Abstract A description is given of the industrial tests on the Shell pulverized coal gasifier fed with coal feed mixed with petroleum coke, and an analysis is made of the process operation before and after the mixing with petroleum coke. The tests indicate that it is technologically feasible to run the gasifier with coal feed mixed petroleum coke, and suggestions are offered for the industrial use of the Shell gasifier based on pulverized coal mixed with petroleum coke.
Keywords Shell pulverized coal gasification feed mixed petroleum cokeindustrial tests
1
Shell粉煤加压气化技术简介
Shell粉煤加压气化技术以干煤粉为原料、纯
氧为气化剂,采用液态排渣,属于加压气流床气化工艺。Shell粉煤加压气化装置由磨煤及干燥、煤加压及进煤、气化及合成气冷却、除渣、除灰、洗涤、废水汽提及澄清、公用工程系统等工序组成,其工艺流程如图1所示。
原煤被破碎、研磨成粉煤并经过滤干燥处理,然后用N,加压送人储罐;储罐内的粉煤通过加料器与0,及蒸汽一起进人粉煤烧嘴,再送入气化炉的燃烧室。煤粉、蒸汽和0,的混合物在压力 3.0~4.0MPa、温度1400~1700℃的条件下在气化炉内发生化学反应,氧煤比根据合成产气量及组分(CO,和CH,含量)进行调节:粉煤所含的
本文作者的联系方式:chengpx.aqsh@sinopec.com 万方数据

飞灰漏环助熔布密煤/干燥
避煤 02
激冷气福坏
高压菱汽中压蒸汽
43
一酸磺等合成气
清险飞爽醒洗净化
水处理
炉查
灰仓
图1Shell粉煤加压气化工艺流程
混饼
灰分熔化并滴至气化炉底部灰渣激冷室中,经水冷却变成玻璃状不可沥滤的炉渣排出。
出气化炉的合成气(1300~1500℃)用循环气激冷至900℃以下,然后进人合成气冷却器进
上一章:粉煤气化中煤粉的适应性改造 下一章:低温甲醇洗系统冷量分配改造总结

相关文章

Shell粉煤气化技术应用综述 Shell粉煤气化装置系统保护措施探讨 Shell粉煤气化工艺煤灰熔融性探析 Shell粉煤气化装置中压蒸汽管网的改造 Shell粉煤气化工艺中煤粉储罐内的煤粉保护措施 Shell粉煤气化工艺激冷循环气系统抗腐蚀改进 Shell粉煤气化系统中高温高压过滤器应用注意事项 Shell粉煤气化装置激冷气压缩机高速轴振动问题的研究