您当前的位置:首页>论文资料>PVC/环氧树脂E51共混物性能的研究

PVC/环氧树脂E51共混物性能的研究

资料类别:论文资料

文档格式:PDF电子版

文件大小:282.52 KB

资料语言:中文

更新时间:2025-01-04 15:19:01



推荐标签:

内容简介

PVC/环氧树脂E51共混物性能的研究 第40卷第7期
2012年7月【材料与性能】
聚氯乙烯
Polyvinyl Chloride
PVC/环氧树脂E51共混物性能的研究
黄进",金旭",王彩红",鲁圣军”,解
(1.允福(集团)有限责任公司,责州福泉550501;
2.国家复合改性聚合物材料工程技术研究中心,责州资阳550004)
[关键词]PVC;环氧树脂;固化剂;力学性能;维卡软化温度
Vol.40,No.7 Jul.,2012
[摘要]以504及554/504分别作为固化剂,采用维形双螺杆挤出机实现了PVC与环氧树脂的熔融共混,制备了PVC/环氧树脂E51共混物。固化剂用量为环氧树脂E51用量的80%时,研究了环氧树脂E51用量、固化剂组成及固化时间对PVC/环氧树脂E51共混物力学性能及维卡软化温度的影响。结果表明:以504及554/504为固化剂,少量环氧树脂E51(4份以内)加人PVC后,有助于提高共混物的拉伸强度、弯曲强度;当环氧树脂E51为2 份、固化时间为8h时,共混物维卡软化温度达到最大值100.2℃,比纯PVC高出16.5℃。
[中图分类号]TQ325.3
[文献标志码]B
[文章编号]10097937(2012)07001706
Study on properties of PVC/epoxy resin E51 blends
HUANGJin',JINXun',WANG Caihong",LUShengjun',XIETian?
(1. Wengfu (Group) Co., Ltd., Fuquan 550501, China; 2.National Engineering Rescarch Center for Compounding and Modification of Polymcric Materials,Guiyang 550004,China)
Key words: PVC; epoxy resin; hardener; mechanical property; Vicat softening temperaturc Abstract: Using 504 and 554/504 as a curing agent respcctivcly, the PVC/cpoxy rcsin E51
blcnds were preparcd by melt blending in a conical twin-screw extruder. Whilc thc curing agcnt dosagcs accounted for 80% of cpoxy resin E51, thc effects of contcnt of epoxy rcsin E51, curing a-gent composition, curing time on mechanical properties and Vicat softening tempcraturc of PVC/ cpoxy resin E51 blends were studied. The results showed that when thc curing agcnt wcre 504 and 554/504, thc tensile strcngth and flexural strcngth of thc blcnds incrcascd with thc addition of small amount of cpoxy resin E51 (less than 4 parts); whcn thc content of cpoxy resin E51 was 2 parts and the curing timc was 8 h, the Vicat softcning tempcrature of the blends reachcd the maximum valuc of 100.2 C and was 16.5 C highcr than that of the pure PVC.
Foundation item: National Kcy Tcchnology R & D Program(2007BAE10B03)
聚氧乙烯(PVC)树脂具有阻燃、耐腐蚀、绝缘、耐磨损等优良的综合性能和价格低廉、原材料来源广泛的优点,但它的使用也存在着明显的缺陷,如抗冲性、耐热性差,不易加工等,这些缺陷会大大制约 PVC材料应用范围的拓宽[1-2],国内外也对PVC
[收稿日期]2012-07-07
[基金项目]国家科技支撑计划课题(2007BAE10B03)
的改性进行了广泛而深入的研究[3-4]。Pittman Jrcu[5]和XMXuL]等制备了PVC/EP共混物,研究发现PVC/环氧树脂体系形成了半互穿网络结构,这使PVC的力学性能得到了大幅度的提高。由于PVC与环氧树脂的溶解度参数非常相近,且二者
[作者简介]黄进(1970一),男,高级工程师,就福(集团)有限责任公司副总经理,从事化工产品开发与生产。[联系人]王彩红(1972—),女,讲师,研究方向为案合物合成及改性,Email;wangchong2000@sina.com。
万方数据
17
上一章:聚氯乙烯生产中电石消耗的查定及控制 下一章:105m3聚合釜PVC生产能力的提高

相关文章

软质PVC∕环氧树脂共混物性能的研究 相容剂对PC∕ABS共混物性能的影响 PVC∕α MSAN共混物的性能研究 间断级配机制砂对混凝土拌合物性能的影响研究 PVC/苯乙烯类聚合物共混体系紫外光降解研究进展 提高PVC树脂质量的研究 提高 PVC树脂质量的研究 氯化专用PVC树脂的性能研究