您当前的位置:首页>论文资料>沥青库EPC工程导热油热力系统设计与优选

沥青库EPC工程导热油热力系统设计与优选

资料类别:论文资料

文档格式:PDF电子版

文件大小:1.76 MB

资料语言:中文

更新时间:2025-01-15 16:25:38



推荐标签:

内容简介

沥青库EPC工程导热油热力系统设计与优选 第35卷第12期(2016.12)规划设计
沥青库EPC工程导热油热力系统设计与优选
李松「
泰琴1
王大鹏2
摘要:为降低沥青库EPC工程设计中导热油采购一次性投资费用偏高问题,对导热油热力系统设计进行分析,并对3种导热油进行对比,结合青热力工艺设计条件,提出了导热油选用原则。根据导热油选型原则和项目工艺设计条件,能够满足要求的有3种型号的导热油,即DOWTHERMA合成导热油、THERMINOL55合成导热油和HT5 矿物导热油。HT5型导热油属于矿物型导热油,要保证在300℃以下范圈内使用,导热油的热稳定性好,饱和蒸汽压较低,不易挥发,HT5导热油为首选,可以满足沥青库的管道伴热和储罐维温的热力设计要求,节省近50%的导热油采购费。在国外某沥青库EPC工程设计中,首次运用导热油介质为沥青库的沥青管道和沥青储罐进行伴热及维温,目前系统正常运行近2年。
关键词:沥青库;导热油;物性参数;优化分析 Doi :10.3969/j.issn.10066896.2016.12.009
Design and Optimization of the Heat Conducting Oil Thermal System in As-phalt Depot EPC Project
Li Song, Qin Qin, Wang Dapeng
In order to reduce the purchase expense of conducting transfer oil in Asphalt
Abstract:
Storage EPC project, this paper analyses the thermel system of heat conducting oil and com pares the 3 types of heat conducting oil (Synthetic heat conducting oil Dowtherm A, THERM1NOL55 and Mineral heat transfer oil HT5) , puts forward the choosing principles of heat conducting oil based on the design condition of the asphalt thermodynamic technology. Mineral heat transfer oil HT5 can meets the key properties when being used at 300 C , and it has excellent thermel shock stability, lower saturated vapor pressure, less volatile, reasonable price; it can meet the thermal design requirements of heat tracing of asphalt pipes and maintain ing storage tanks temperature, it also can reduce the purchase expense by 50%. Now, it is the first time to use HT5 for asphalt pipe heat tracing and maintaining storage tank temperature in
an Asphalt Storage EPC project and this project has been operating smoothly nearly 2 years. Key words: asphalt depot: heat conducting oil: physical properties: optimaztior
在国外某沥青库EPC工程设计中,首次运用导热油介质为沥青库的沥青管道和沥青储罐进行伴热及维温。在施工图设计期间按照业主FEED文件要求,整个加热系统是采用指定的导热油型号(DOWTHEMA)完成设计的"。但是投产时实际使用的导热油型号为HT5,从而节省近50%的导热油采购费。因此很有必要对更换导热油型号的选型工作进行总结,以便为今后开展类似工程的设计提供借鉴。
导热油热力系统设计
按照国际项目设计模式和FEED文件中相关热
力设计要求,项目先后完成了导热油加热系统成套设备的技术规格书、数据单和施工安装图等一系列设计工作,进人到施工安装和投产前导热油炉预热阶段,需为整个导热油系统及伴热管道一次性注满导热油冷油,然后再点炉使导热油逐步循环升温至所需温度,经计算所需注人导热油量约为60t。
DOWTHEMA导热油当时市场价格每吨约4万元,仅此一项需一次性消耗资金250万元。EPC项目部要求设计对导热油型号进行优选,选择一种朗满足管道伴热和储罐维温的热力设计要求,又尽可能减少工程费用的导热油,实现双赢。
“中国石油天然气管道工程有限公司
“中国石油北京油气调控中心
油气田地面工程https/wwwayqtdmgc.com 万方数据
27
上一章:基于CFD的压裂球座冲蚀磨损数值模拟 下一章:油田注水系统配水量及管网压力的分区块监控

相关文章

国际EPC工程中橇装与系统集成设备的常见问题及应对措施 水库加高扩建排水系统设计——以红崖山水库改扩建工程为例 基于分级特征库的机床故障诊断系统设计与实现 设计采购施工(EPC)交钥匙工程合同条件. 提梁机天车液压系统设计方案优选思路 Q/SY 06016.4-2016 油气田地面工程热工设计规范 第4部分:导热油供热站 国际工程EPC水电项目管理理论与实践 水电工程EPC总承包项目管理理论与实践