您当前的位置:首页>论文资料>无风管喷流诱导通风系统在水面舰船装载舱的应用与探讨

无风管喷流诱导通风系统在水面舰船装载舱的应用与探讨

资料类别:论文资料

文档格式:PDF电子版

文件大小:471.64 KB

资料语言:中文

更新时间:2024-12-25 08:13:34



推荐标签:

内容简介

无风管喷流诱导通风系统在水面舰船装载舱的应用与探讨
2013年10月
【船舶动力装置]


SHIP & BOAT
无风管喷流诱导通风系统在水面舰船
装载舱的应用与探讨
周振宇
(中国船舶及海洋工程设计研究院上海200011)
Vol.24No.5 Oetober,2013
摘要】文章分析了现代水面舰船机库和车辆库通风系统设计的要求和特点,借鉴民用船舶滚装处所和陆用地下停车场喷流诱导通风系统的设计理念和经验,对无风管喷流诱导通风系统在舰船机库和车辆库通风系统中的应用和设计方法进行了分析探讨,为舰船装载舱通风系统设计提供新的设计思路。
【关键调】水面舰船;无风管喷流诱导通风;机库和车辆库通风系统;应用探讨
[中图分类号】U664.86
【文献标志码】A
【文章编号】1001-9855(2013)05-0050-07
Applicationandanalysisofnon-duct-jet-inductiveventilation
system of hangar and garage in surface ships
ZHOUZhen-yu
(MarineDesign &Research-Institute of China,Shanghai 200011,China)
Abstract: This paper analyzes the design requirements and characteristics of the ventilation system of the hangar and garage in moderm suface ships. Learned from the design theory and experience of jet-inductive ventilation system for the ro-ro space of the civil ships and underground parks on land,it analyzes and discusses the application and the design method of the non-duct-jetinductive ventilation system of the hangar and garage in ships,which provides new design concept for the ventilation system of the loading cabin in surface ships.
Keywords: surface ship;nonduct-jet-inductive ventilation;ventilation system for hangar and garage;application and analvsis
0引言
机库和车辆库是水面舰船常见的装载舱,其装载的飞机、坦克和车辆等,往往与舰船的任务密切相关,这些装载和装备的状态,决定了舰船的战斗力。因此,机库和车辆库通风系统往往有别于其他舱室,是特种舱室通风系统的重点。近年来,随着大型现代水面舰船的设计建造,这些舰船机库和车辆库的设置出现一些新特点,对机库和车辆库通风系统设计提出了新要求,需采用新的通风技术来适应新的需求。
【收稿日期]2013-0227;【修回日期】2013-0325
1舰船机库和车辆库通风系统设计的
特点和需求
现代水面舰船机库和车辆库等装载舱总体上呈现以下特点:
(1)机库和车辆库的配置规模大,单舱大、长度长;舱室在总体布局上呈上下重叠或交叉布置;随着舰船的大型化设计,单般舰船装载的装备数量增加,机库和车辆库的规模则往往成倍增大。
(2)机库和车辆库为封闭型.舱内日常换气和空气品质很大程度地依赖于机库和车辆库通风系统。
[作者篇介】周振宇(1971-),女,确士,高级.T.程师,研究方向;空调、冷藏和通风。 50
上一章:无速度传感器永磁同步电机低脉动直接转矩控制 下一章:饮用水配水系统生物稳定性的控制指标及应用

相关文章

CB 20681-2020 水面舰船电磁屏蔽通风组件规范 人因工程在舰船电力监控系统中的应用 大型水面舰船电缆敷设工程探索 某新型舰船主推进装置监控系统FMECA在维修性分析中的应用 CB 20685-2020 水面舰船跨接线规范 CB 20706-2020 水面舰船调节布风器规范 电力监控系统在邢钢ems项目中的应用与探讨 CB 20051-2012 水面舰船球鼻首安装工艺