您当前的位置:首页>论文资料>新型愈创树脂-高密度聚乙烯水润滑尾轴承材料的制备及性能研究

新型愈创树脂-高密度聚乙烯水润滑尾轴承材料的制备及性能研究

资料类别:论文资料

文档格式:PDF电子版

文件大小:1.6 MB

资料语言:中文

更新时间:2024-12-24 17:53:56



推荐标签:

内容简介

新型愈创树脂-高密度聚乙烯水润滑尾轴承材料的制备及性能研究 第39卷第9期 2017年9月
舰船科学技术
SHIP SCIENCE AND TECHNOLOGY
Vol. 39, No.9 Sept.,2017
新型愈创树脂-高密度聚乙烯水润滑尾轴承
材料的制备及性能研究
姜松12,郭智威12,刘爱学3,白秀琴12,陶威12,袁成清12(1.武汉理工大学船舶动力工程技术交通行业重点实验室,湖北武汉430063; 2.国家水运安全工程技术研究中心可靠性工程研究所,湖北武汉430063:
3.株洲时代新材料科技股份有限公司,湖南株洲412007)
摘要:尾轴承是船舶推进系统的重要组成部分,尾轴承材料对轴承的性能起着决定性作用。本文设计并制
行摩擦试验,考察在渐变转速下复合材料的摩擦系数和磨损率。通过分析试验数据,确定了材料混合最佳配比。试验结果表明B型(0.5%愈创树脂)复合材料在力学性能和摩擦性能方面综合性能最好,该研究为该类材料未来在水润滑尾轴承方面的应用提供试验依据:
关键词:水润滑尾轴承;愈创树脂;高密度聚乙烯:摩擦系数;磨损量
中图分类号:TB33
文献标识码:A
文章编号:1672-7649(2017)09011706
doi: 10.3404/j.issn.1672 7649.2017.09.023
Thepreparationandperformancestudyonthewater-lubricated sternbearing
materials of the new guaiacum-HDPE
JIANG Song'2, GUO Zhi-wei'-2, LIU Ai-xue', BAI Xiu-qin'-2, TAO Weil-2, YUAN Cheng-qing'?
(1. Key Laboratory of Marine Power Engineering & Technology (Ministry of Transport), Wuhan University of Technology,
Wuhan 430063, China; 2. Reliability Engineering Institute, National Engineering Research Center for Water
Transportation Safety,Wuhan 430063, China; 3. Zhuzhou Times New Material Technology Co., Ltd., Zhuzhou 412007, China)
Abstract: Stern bearing is an important component of the marine propulsion system. the material of Stern bearing plays a decisive role in the bearing performances. In this study, different proportion of guaiacum-HDPE were designed. The mech-anical properties of new composite materials and the general HDPE material were examined. Moreover, the performance in-fluences on composites of different guaiacum concentrations were compared and analyzed. Wear tests of the four materials were conducted using the CBZ-1 pin-on-disc tester. The friction coefficient and wear mass loss of rubbing pairs were ana-lyzed under the test conditions. By analyzing test data, the optimum material mixing ratio was obtained. The tested results showed that the composite material B (o.5% guaiacum) had the best comprehensive properties in mechanical properties and tribological performances. This research will provide the experimental basis on the future applications of water-lubricated stern bearing
Key words: water lubricated stern tube bearing; guaiacum; HDPE; friction coefficient; wear mass loss
0引言
尾轴承是船舶推进系统的重要组成部分,对螺旋桨轴起着支撑的作用,其使用寿命和工作可靠性直接收稿日期:2016-09-03;修回日期:2016-11-04
影响着船舶在航行过程中的安全性和可靠性。由于尾轴在运行过程中的不稳定性,以及其承受着各种不均匀的附加负荷,故其工作条件比较恶劣,难以形成有
(06160)作者简介:要松教筛-),男,硕士研究生,研究方向为摩擦学及表面工程。
上一章:无人机红外辐射特性数值模拟研究综述 下一章:特殊继电器在舵机电气控制系统中应用分析

相关文章

膨胀石墨∕高密度聚乙烯∕石蜡导热增强型定形相变复合材料的制备及性能研究 新型水性高反射高辐射隔热涂料的制备及性能研究 ANCO水润滑高分子轴承摩擦性能的研究 高密度PMI泡沫塑料的制备、结构与性能研究 新型丙烯酸铜树脂的制备方法及其性能研究 高柔性低面密度预浸料的制备与性能研究 机床轴承用新型合金钢的制备与性能研究 HG/T 6039-2022 塑料 水上浮体用改性高密度聚乙烯(PE-HD)材料