您当前的位置:首页>论文资料>聚乙二醇链段对透明防火涂层柔韧性及阻燃性的影响

聚乙二醇链段对透明防火涂层柔韧性及阻燃性的影响

资料类别:论文资料

文档格式:PDF电子版

文件大小:1.57 MB

资料语言:中文

更新时间:2025-01-06 11:38:33



推荐标签:

内容简介

聚乙二醇链段对透明防火涂层柔韧性及阻燃性的影响 H 艺技术
第43卷第9期 2013年9月
涂料工业
PAINT&COATINGS INDUSTRY
Vol.43No.9 Sep. 2013
聚乙二醇链段对透明防火涂层柔韧性及阻燃性的影响
胡晓仙,洪玲:(上海大学化学系,上海200444)
摘要:氨基树脂与磷酸酯组成的复配体系防火性能佳,但交联密度大,因此涂层的柔韧性、抗龟裂性差。为了改善体系柔韧性、抗龟裂性,将不同链长的聚乙二醇(PEG)与多聚磷酸(PPA)、多元醇合成聚磷酸酯,再与甲醛化的三聚氰胺甲醛树脂复配,制备了膨胀阻燃透明聚合物涂层。通过FT-IR、TG、硬度测试、柔韧性测试、SEM等手段,研究了PEG柔性链长对涂层柔闭性、抗龟裂性、阻燃性等的影响规律。结果表明:PEG链段的引人能有效改善涂层的柔韧性,链长越长,柔闭性、抗龟裂性越佳,但链长过长,阻燃性降低
关键词:透明涂层:膨胀阻燃:聚乙二醇;柔韧性
中图分类号:TQ637.6
文献标识码:A
文章编号:0253-4312(2013)09-0042-05
EffectofPEGChainSegmentonFlexibilityand FlameRetardance of TransparentFireproofVarnish
HuXiaoxian,HongLing
(Department of Chemistry,ShanghaiUniversity,Shanghai 200444,China)
Abstract:Fireproof performance of compound coating system which is composed of amino resin and phosphate is good, but due to the higher crosslinking density, the flexibility and crack resistance of coating is poor. In order to improve the flexibility and the crack resistance performance of this system, in this article, phosphate resins were synthesized from polyethy-lene glycol (PEG)with different chain length and polyphosphoric acid(PPA),polyols,and blended with methyl etherified melamine formaldehyde resin to formulate an intumescent trans-parent fireproof varnish. Effect of flexible PEG chain segment on the flexibility, cracking re-sistance and flame retardance of the varnish was investigated by F-TIR, TG, pencil hardness tester, flexibility tester, and SEM.It was found that introduction of PEG can effectively im-prove the flexibility of the coating. The longer the chain length of PEG, the better the flexibi-lity of the coating, and thus the less the cracking of the coatings.But the excessively longer PEG chain would reduces theflame retardant performance.
Key Words: fireproof coating; intumescent flame retardance; polyolspolyethylene glycol; flexibility
透明防火涂料是一种既保证被涂物的原貌,又起到防火效果的一类防火涂料,可应用在古建筑!]、文
*通信联系人 42
物保护以及高档木质家具的涂饰上。透明聚合物防火涂层厚度较薄,无卤条件下耐燃时间要达到30min
上一章:风电机组叶片防结冰涂料防结冰性能评价方法研究 下一章:高档玻璃瓶用紫外光固化涂料的研究

相关文章

影响自保护药芯焊丝焊缝韧性及离散性的因素 材料表面涂层防火阻燃技术 HG/T 4949-2016 模内装饰(IMD)用透明光学聚对苯二甲酸乙二醇酯(PET)硬化薄膜 HG/T 5299-2018 锢锡氧化物(ITO)镀膜用透明聚对苯二甲酸乙二醇酯(PET)硬化薄膜 HG/T 5299-2018 铟锡氧化物(ITO)镀膜用透明聚对苯二甲酸乙二醇酯(PET)硬化薄膜 GB/T 28596-2012 内壁碳涂层聚对苯二甲酸乙二醇酯瓶 XF/T 3006-2020 灭火剂及防火阻燃产品快速检定技术要求 XF/T 3006-2020 灭火剂及防火阻燃产品快速检定技术要求