您当前的位置:首页>论文资料>水中溶解性总固体检测条件探讨

水中溶解性总固体检测条件探讨

资料类别:论文资料

文档格式:PDF电子版

文件大小:1010.69 KB

资料语言:中文

更新时间:2024-11-28 13:56:55



推荐标签:

内容简介

水中溶解性总固体检测条件探讨 第29卷第4期 2017年8月
浙江水利水电学院学报
J. Zhejiang Univ of Wat. Res & Electric Pow.
D0I: 10. 3969/j. issn. 2095-7092. 2017.04. 010
水中溶解性总固体检测条件探讨
曹樱楼,卢卫
(浙江省水文局,浙江杭州310009)
Vol.29No.4 Aug.2017
摘要:溶解性总固体包括水中不易挥发的可溶性盐类、有机物和能通过过滤器的不溶性微粒等,是衡量水质优劣的重要指标之一.采用不同的检测方法在不同的环境条件下检测,会获得不同的溶解性总固体含量,即影响溶解性
探讨最佳的检测条件,获取最准确的结果。关键词:溶解性总固体;水质;检测条件;影响
中图分类号:X703.1
文献标志码:A
文章编号:1008536X(2017)04-0051-05
OnTestConditionsofTotalDissolvedSolidsinWater
CAOYing-ying,LUWei
(Zhejiang Provincial HydrologyBureau,Hangzhou310009,China)
Abstract : Total dissolved solids , including insoluble soluble salts , organic matter and insoluble partieles through filters , are important indicators of water quality . Different detection methods , such as the selection mode of different drying temper ature and adding sodium carbonate method , in different environment conditions , will get different results of the total dissolved solids , that means the main factors affecting the determination results of total dissolved solids inelude drying tem -perature, adding sodium earbonate and the environment humidity . Through the comparison of test results of total dissolved solids in different drying temperature , relative humidity and the addition of sodium carbonate , the main factors affecting the
total dissolved solids are analyzed to explore the optimal test conditions so as to obtain the most accurate results . Key words;total dissolved solids; water quality; test conditions; influence
水是生命之源,水的安全是生命安全的基础.随
着生活水平的提高,人们对健康饮水的需求越来越迫切.溶解性总固体包括水中不易挥发的可溶性盐类、有机物和能通过过滤器的不溶性微粒等,是衡量水质优劣的重要指标之一1研究溶解性总固体的检测条件以获得准确的检测结果具有一定的实际意义
检测水中溶解性总固体的方法大都采用《饮用天然矿泉水检验方法》(GB8538一2016)和《生活饮用水标准检验方法:感官性状和物理指标》(GB/ T5750.42006).根据《饮用天然矿泉水检验方法》
收稿日期:2017-04-03
作者简伞:曹撑(1983-),女,浙江东阳人,硕士,高级工程师,研究方向为尔数剧技术。
(GB8538一2016),溶解性总固体指水中溶解的无机矿物成分的总量,是水样经过滤后,干燥并恒重,测得蒸发残渣含量加上碳酸氢盐含量的一半2}.根据《生活饮用水标准检验方法:感官性状和物理指标》(GB/ T5750.4一2006),溶解性总固体是水样经过滤后,在一定温度下烘干并恒重,所得的固体残渣的含量[3].
采用不同的检测方法,选用方法中不同的烘干温度和添加碳酸钠的方式,在不同的环境条件下检测,会获得不同的溶解性总固体的检测结果,即影响溶解性总固体测定结果的主要因素包含了烘干温度、是否加碳酸钠以及环境湿度.本文设计不同的检测条件,对结果数据进行分析与比对,分析影响溶解性总固体检测结果的主要因素,探讨测定溶
上一章:青山水库白蚁危害综合治理对策及效果 下一章:全要素生产率、资本和劳动力对产出贡献率的比较研究——理论与来自宁波交通运输业的证据

相关文章

压力水中典型气体溶解特性与计算方法研究 GB/T 27844-2011 化学品 聚合物在水中的溶解 析出特性 GB/T 6370-2012 表面活性剂 阴离子表面活性剂 水中溶解度的测定 NY/T 1860.23-2016 农药理化性质测定试验导则第23部分∶水中溶解度 NY/T 1860.23-2016 农药理化性质测定试验导则 第23部分:水中溶解度 GB/T 20245.4-2013 电化学分析器性能表示 第4部分:采用覆膜电流式传感器测量水中溶解氧 JJF(闽) 1097-2020 总溶解固体(TDS)测定仪 JJF(闽)1097-2020 总溶解固体(TDS)测定仪校准规范