您当前的位置:首页>论文资料>结构钢成分对热变形淬火组织的影响

结构钢成分对热变形淬火组织的影响

资料类别:论文资料

文档格式:PDF电子版

文件大小:1.98 MB

资料语言:中文

更新时间:2024-12-23 14:04:56



推荐标签:

内容简介

结构钢成分对热变形淬火组织的影响 第37卷第4期 2016年8月
热处理技术与装备
RECHULI JISHU YU ZHUANGBEI
结构钢成分对热变形淬火组织的影响
张红英,陈浩时
(上海应用技术学院材料科学与工程学院,上海201418)
Vol.37.No. 4 Aug,2016
·性能研究·
摘要:利用Gleeble1500热/力学模拟实验机,对20Cr、40Cr和45钢等结构钢进行了温度为950、 1050、1150℃,变形速率为1、5、10/s,变形量为0.5、0.7、0.9的热模拟单向压缩试验,分析了钢热变形水冷组织。结果表明,钢热变形后奥氏体晶粒呈等轴晶形状,热变形温度对奥氏体晶粒大小起主要的作用。40Cr钢萍火组织为马氏体,20Cr、45钢出现屈氏体,热变形奥氏体有促进珠光体转变的
作用。实际生产中,采用热变形火工艺时必须考虑钢的萍透性大小。关键词:结构钢;热变形;泽火;显微组织
中图分类号:TG113.1文献标志码:A
文章编号:1673-4971(2016)04-0039-04
EffectofStructuralSteelCompositiononThermalDeformationMicrostructrue
ZHANG Hong-ying, .CHEN Hao-shi
( Materials science and Engineering College, Shanghai Institute of Technology, Shanghai 201418, China) Abstract : A unidirectional compression test of thermal simulation was done by Gleeble 1500 thermal / me chanical simulation machine for 20Cr, 40Cr and 45 structural steel at 950,1050,1150°C, deformation rate 1,5,10/s and deformation 0.5,0.7,0.9. Water-cooled microstructure of thermal deformation steel was an alyzed. The results show that austenite is equiaxial grain after thermal deformation, and temperature of her-mal deformation plays main role on austenite grain size. The quenching microstructure of 40Cr steel is mar tensite, and 20Cr and 45 steel appear troostite. The thermal deformation austenite promotes pearlite trans formation. The hardenability of steel must be taken into account using the thermal deformation quenching process in practical production.
Key words:structural steel; thermal deformation; quenching; microstructure 收稿日期:2016-03-06
作者简介:张红英(1963.11-),女,副教授,硕士,主要从事金属材料热处理工艺组织性能的研究。
联系电话:13601660554;E-mail;zhy@sit.edu.en
[10]
喻玮强,文先暂,陈响明,等.稀土钼合金组织结构的研究[J].稀有金属与硬质合金,2002,30(3):33-37. Zhang G J, Liu G, Sun Y J, et al. Microstructure and
[11]
strengthening mechanisms of molybdenum alloy wires doped with lanthanum oxide particles[J]. Intemational Joumal of Refractory Metals & Hard Materials, 2009, 27(1) :173 176.
[12]
韩强,钼合金板材料舟的研制及其断裂行为分析[J].稀有金属材料与工程,2012,41(9):1564 1567.
万方数据
[13][14]
李静,高家诚,王勇.掺杂提高钼丝再结晶温度的研究进展[J].稀有金属与硬质合金,2003,31(1):22 24.
Majumdar S, Kapoor R, Raveendra S, et al. A study of hot deformation behavior and microstructural character-ization of Mo-TZM alloy[J]. Jourmal of Nuclear Materi-als,2009, 385(3):545551.
[15]
成会朝,卢明园,范景莲,等,微量合金元素Zr对Mo 合金性能和显微组织的影响[J].稀有金属材料与工程,2009,27(1):14711474.
上一章:碳钢表面Zn-Al合金渗层的制备及性能研究 下一章:马氏体转变(六)

相关文章

两种模具材料对热等静压 TC4显微组织的影响 淬火温度对25Cr2Ni3Mo垫片组织和性能的影响 热变形参数对镁合金力学性能及微观组织的影响 预变形对FGH97粉末高温合金热处理组织的影响 铁基钎料成分对304不锈钢钎焊接头组织和性能的影响 化学成分对衬板用低碳高合金钢组织和性能的影响 变形温度对异种钛合金电子束焊件显微组织与力学性能的影响 GB/T 38720-2020 中碳钢与中碳合金结构钢 淬火金相组织检验