您当前的位置:首页>论文资料>SCR脱硝反应器入口导流板设计优化分析

SCR脱硝反应器入口导流板设计优化分析

资料类别:论文资料

文档格式:PDF电子版

文件大小:177.92 KB

资料语言:中文

更新时间:2024-12-16 09:09:43



推荐标签:

内容简介

SCR脱硝反应器入口导流板设计优化分析 2018年第2期(总第242期)
doi:10. 3969/j. issn. 1009 3230.2018. 02. 006
应用能源技术
SCR脱硝反应器入口导流板设计优化分析
冯立波
(浙江天地环保科技有限公司,杭州311121)
摘要:随着我国对NOx排放标准的不断提高,单纯依靠燃烧过程控制已不能满足国家标准要求,因此国家也相应出台了一系列控制燃煤电厂NOx排放的法律、法规和政策,促使我国加快燃煤电厂烟气脱硝装置的建设。SCR脱硝技术具有脱硝效率高、运行可靠等优点,已得到了广泛应用。文中主要介绍燃煤电厂SCR脱硝反应器入口导流板对SCR脱硝反应器流场的优化作用及入口导流板设计优化分析,对SCR脱硝反应器入口导流板的设计原则及优化分析等进行了一定的阐述。
关键词:SCR;SCR脱硝反应器;导流板
中图分类号:TK229.3
文献标志码:B
文章编号:10093230(2018)020025-03
DesignOptimizationAnalysisofInletFlowDeflector
ofSCRDedenitrationReactor
FENG Li - bo
(Zhejiang Tiandi Environmental Protection Technology Co.,Ltd.Hangzhou311121,China)
25
Abstract:With the constants improvement of NOx emission standards in our country, relying on the combustion process control can not meet the national standard requirements, Therefore, a series of laws,regulations and policies are put in place to control NOx emissions from coal fired power plants, encourage China to speed up the construction of flue gas denitration device in coal fired power plant. SCR denitration technology has the advantages of high denitration efficiency and reliable operation, and has been widely used. The article here mainly introduces the coal fired power plant SCR denitration reactor inlet guide threatening the SCR denitration reactor of the flow field is optimized and the entrance flow deflector design optimization analysis, the SCR denitration reactor
inlet flow deflector design principle and optimization analysis was described. Keywords:SCR;SCR denitration reactor;Flow deflector
0引言
氮氧化物(NOx)是主要的大气污染物之一,燃煤排放的NOx约占总NOx排放量的70%以上。目前,我国燃料还是以煤为主,随着我国经济的飞速发展,煤的需求量不断增大,因此如何降低NOx 的污染已成为-个不容忽视的向题"]。在NOx
收稿日期:2017-11-11
修订日期:20171218
作者简介:冯立波(1980-)男,硕士在读,工程师,从事发
电厂热动环保专业技术工作。
万方数据
处理的技术中,选择性催化还原技术(SCR)具有 NOx脱除率高、技术成熟可靠和经济适用性强等优点,已成为燃煤电厂烟气脱硝的首选。SCR脱硝反应器作为SCR法脱硝系统中的主要设备,脱硝反应器的设计需要充分利用有限元计算方法的高效准确性,以实现SCR脱硝反应器的设计优化,确保脱硝装置安全可靠运行。为了保证SCR 脱硝反应器内部流场的分布均匀性,通常需要在脱硝反应器设计中设置导流板,导流板的设置可
上一章:变频器谐波分析与抑制对策 下一章:半导体制冷技术刍议

相关文章

JB/T 11888-2014 选择性催化还原法(SCR)烟气脱硝反应器工艺设计导则 圆头钉板式空气预热器导流板优化设计 SCR脱硝反应塔流场数值模拟研究 SCR脱硝系统流场数值模及优化 火电机组SCR脱硝系统热量平衡分析 影响SCR脱硝效率因素的分析与探讨 火电厂SCR脱硝催化剂失活原因的分析 600MW火电机组提高SCR入口烟温方案研究