您当前的位置:首页>论文资料>水性转锈防腐乳液的合成与性能研究

水性转锈防腐乳液的合成与性能研究

资料类别:论文资料

文档格式:PDF电子版

文件大小:4.28 MB

资料语言:中文

更新时间:2025-01-06 09:59:53



推荐标签:

内容简介

水性转锈防腐乳液的合成与性能研究 第46卷第11期 2016年11月
涂料工业
PAINT&COATINGS INDUSTRY
水性转锈防腐乳液的合成与性能研究张光华,徐风(陕西科技大学化学与化工学院,教育部
轻化工助剂化学与技术重点实验室,西安710021)
Vol.46No.11 Nov.2016
摘要:以没食子酸为原料与1,2-丙二醇反应合成具有转锈作用的络合剂单体,以P,0,为原料
酸丁酯等原料,采用预乳化-半连续种子乳液合成方法,制备一种水性带锈转锈聚合物乳液。通过扫描电镜(SEM)、能量分析光谱仪(EDX)、X射线光电子能谱仪(XPS)及X射线粉末衍射仪(XRD)表征铁锈与转锈剂作用的产物及其膜的防腐性能。通过交流阻抗、Tafel极化曲线及一般理化性能分析考察水性转锈乳液的成膜性能及其对钢铁的防腐性能的影响。结果显示:转锈剂与铁锈作用生成转化膜并附着在基材表面,膜层1h内变黑,表明转锈剂与铁锈有效作用且对钢铁的防腐性能良好:水性转锈乳液涂膜附着力2级,铅笔硬度HB,耐盐雾72h:随浸泡时间的延长,涂层的容抗弧直径变大,涂层电阻也相应变大,耐腐蚀性量增强趋势:乳液粒径为30.31nm,呈单峰分布,强度大且峰形牵,粒径分布指数比较小,说明乳液粒径分布均一,附着性良好;转锈后锈层表面平整、结构紧密,可以有效阻止锈蚀:各项指标结合说明涂层成膜性能良好且防腐效果好。
关键词:水性涂料;转锈剂;没食子酸;磷酸酯
中图分类号:TQ635.2
文献标识码:A
文章编号:0253-4312(2016)11-0051-07
StudyonSynthesisandPerformanceofWaterborne
RustConversionAnticorrosiveEmulsion
Zhang Guanghua, Xu Feng
( Key Laboratory of Auxiliary Chemistry & Technology for Chemical Industry, Ministry oj
Education,Shaanxi Uninersity of Science & Technology,Xi'an 710021,China)
Abstract : The P,Os, as phosphorylation agent was reacted with hydroxyethyl methacrylate ester(HEMA) at the presence of rust conversion agent which was synthesized by using gallic acid and 1,2-propanediol to form a phosphate ester functional monomer, which was further mixed with methyl methacrylate, butyl acrylate, haloalkene, etc. to prepare a waterborne rust conversion anticorrosive polymer emulsion via a seed emulsion polymerization method. The products derived from reaction of rust and rust conversion agent and film properties were char-acterized by SEM, EDX, XPS and XRD. Meanwhile, the properties of emulsion were studied by alternating current impedance and tafel polarization curve and other physicochemical analy-sis. The results showed that the rust on the surface of the steel could react with rust conversion agent to form a film which became black with 1 h and provided good anticorrosive performance.*通信联系人
作者介:张光华(1962一),男,教投,博士生导师,研究方向为水落性高分子助剂。
51
健康·安全·环境
上一章:水性丙烯酸光致抗蚀干膜的合成 下一章:油气管道露空钢结构外防腐层设计标准对比及设计实践

相关文章

水性封闭异氰酸酯乳液的合成及稳定性研究 丙烯酸酯改性水性聚氨酯乳液的合成及性缝研究 有机硅改性环氧-聚氨酯乳液的合成与性能研究 有机硅丙烯酸酯共聚乳液压敏胶的合成与性能研究 磺酸型水性聚氨酯的合成与性能研究 纳米TiO2改性水性聚氨酯乳液的制备及性能研究 叔碳改性硅丙乳液复合涂层的防腐蚀性能研究 桐油酸改性丙烯酸酯乳液的合成及性能研究