您当前的位置:首页>论文资料>利用晶体多重衍射进行同步辐射光子能量标定

利用晶体多重衍射进行同步辐射光子能量标定

资料类别:论文资料

文档格式:PDF电子版

文件大小:310.51 KB

资料语言:中文

更新时间:2024-12-14 13:57:37



推荐标签:

内容简介

利用晶体多重衍射进行同步辐射光子能量标定 第19卷第5期 2011年5月
文章编号1004-924X(2011)05-0977-06
光学精密工程
Optics and Precision Engineering
Vol.19No.5
May2011
利用晶体多重衍射进行同步辐射光子能量标定
陶世兴1,2*,牛晶1,陈鸣之1,刘科1,
王玉,汪启胜,孙波,黄胜,唐琳,何建华
(1.中国科学院上海应用物理研究所,上海201800;2.中国科学院研究生院,北京10049)
摘要:介绍了多重衔射的基本原理,包括多重衍射的指标化、衍射光强度的计算和人射光方向的确定,并根据晶体多重衍射现象提出了人射X光能量的标定方法。从理论上讲,使用该标定方法在角度扫描精度为1"时,光子能量标定精度可达到1eV。在上海光源14B衔射光束线上对提出的标定方法进行了实验验证,在10keV处用Si(111)为主衍射收集了 180°扫描衔射谱,对其中的循射谷进行了指标化,并根据指标化的结果计算得到标定能量为10.06keV。该实验结果
与理论结果相符,验证了在角度扫描精度满足实验要求时,通过该标定方法可进行高精度的光子能量标定。关键调:多重衍射;同步辐;光子能量标定:Φ扫摘;舒射谷
中图分类号:0436.1;072
文献标识码:A
doi,10.3788/OPE, 20111905.0977
Calibrationofsynchrotronradiationphoton energyusingcrystalmultiplediffraction
TAO Shi-xingl-2·,NIU Jing', CHEN Ming-zhi',LIU Ke',WANG Yu', WANG Qi-sheng',SUN Bo',HUANG Sheng',TANG Lin',HE Jian-hua
(1.Shanghai Institute of AppliedPhysics,ChineseAcademyof Sciences,Shanghai201800,China;
2.GraduateUniversity of ChineseAcademy of Sciences,Beijing 100049,China)
Currespondingauther,E-mail;taoshizing@sinap.ac.cn
Abstract: This paper describes the basic principle of multiple diffraction, including diffraction indexing and its intensity calculation, as well as the direction determination of the incident X-ray that meets the Bragg condition for two specific crystal planes, It proposes a X-ray energy calibration method based on the crystal multiple diffraction. In theory, this calibration method can reach a very high precision of 1 eV when the scanning step is 1". To verify the feasibility of this method, a test is performed on the 14B diffraction beam line of Shanghai source,and the 18o°@ scanning diffraction pattern for the silicon(111) is collected at 1o keV. All the possible diffraction planes are set up and the glitch is indexed ac cording to the angle difference of them. After indexing of the glitch, the calibrated energy of 10. 06 keV is obtained. The experimental results are consistent with the theoretical results well, which proves that the calibration method can achieve a high precise calibration for photon energies when the angle scanning accuracy meets the needs of experiments.
收稿日期:2010-10-12;修订日期:2010-11-17.
基金项目:上海市自然科学基金资助项目(No.08JC1422500)
上一章:三乙醇胺在镁铝尖晶石固结磨料研磨中的作用 下一章:两路脉冲固体激光器的相干合成

相关文章

粉末衍射法测定晶体结构(第二版) 上册 X射线衍射结构晶体学基础 晶体和准晶体的衍射 光子、声子晶体的传输理论 光子晶体原理及应用 非线性光子晶体的研究 量子光学与光子学的融合:量子点自组装光子晶体光纤 光子晶体光纤与飞秒激光技术 光子晶体光纤数值孔径的测量和数值研究