您当前的位置:首页>论文资料>钒钛矿中配加印度粉的研究与应用

钒钛矿中配加印度粉的研究与应用

资料类别:论文资料

文档格式:PDF电子版

文件大小:143.42 KB

资料语言:中文

更新时间:2024-12-04 14:28:42



推荐标签:

内容简介

钒钛矿中配加印度粉的研究与应用 0
总第252期 2016年第12期
河北冶金 HEBEI METALLURGY
钒钛矿中配加印度粉的研究与应用

阔,孝利
(河钢集团承钢公司炼铁部,河北承德067002)
Total No.252 2016,Number12
摘要:在钒钛烧结原料中配加印度粉,烧结机的利用系数降低,烧结矿的强度下降,固体燃料消耗升高,影响了烧结生产的技术经济指标。通过在钒钛烧结原料中配加印度粉的烧结杯试验,确定了最优配料方案,并按照确定的配料方案进行工业生产。结果表明:在钒钛烧结原料中配加印度粉时,将印度粉配比控制在5%~10%,钒粉配比控制在20%~35%,可在一定程度上改善瓷结矿的技术经济指标。
关键词:钒钛矿;印度粉:配料方案;研究;应用
中图分类号:TF046.4
文献标识码:A
doi;10. 13630/j. cnki. 13 1172. 2016. 1203
文章编号:10065008(2016)12001004
STUDYANDAPPLICATIONTOADDINDIANORE POWDERINVANADIUM-TITANIUMORESINTERING
Zhong Chuang,SuiXiaoli
(Iron Making Department, Hesteel Group Chengsteel Company, Chengde, Hebei, 067002)
Abstract; To add Indian ore powder in vanadium titanium sintering materials would cause the utilization co-efficient reduced, the strength of sinter lowered, the consumption of solid fuel raised, and at last affect the technical and economic indexes of sintering production. The sintering pot test to add Indian powder is con-ducted, the best proportional plan is determined, and the industrial production is done according to the plan., It is showed in test that in proportioning, the technical and economic indexes of sinter can be improved to a cer-tain extent when the Indian proportion controlled within 5% to 10% , vanadium powder within 20% to 35% Key Words: vanadium titanium ore; Indian powder; proportioning plan; research; application
引言
为了优化原料结构,降低烧结矿成本,决定在承
钢公司钒钛烧结料中配加一定比例印度粉。在钒钛烧结原料中配加印度粉,会给烧结生产的技术经济指标带来不利影响:烧结机利用系数降低,烧结矿强度下降,固体燃料消耗升高。为消弱配加印度粉后
对烧结矿技术经济指标的影响,在进行工业生产前首先进行了配加印度粉的烧结杯试验,以确定最优配料方案,再按照确定的配料方案进行工业生产。
1 1.1
实验室试验
原燃料的物理化学性能
试验用原燃料的物理化学性能见表1。
原燃料的物理化学性能表1
Physical and chemical properies of raw and fuel materials
Tab.1
Cao
高品钒粉纯普粉 PB粉麦克粉北非粉
1.37 0.29 0.09 0.12 0.67
Mgo 1.26 0.37 0.32 0.47 0.35
sio, 3.15 6.61 3.25 5.34 12.40
TFe 63.64 66.16 61.12 59.88 58.53
V,o 0.564 0.036 0.022 0.027 0.051
收璃日期:20161102
作者简介:钟闻(1984-),男,助理工程师,2007年毕业于内蒙古科技大学冶全工程专业,现在河钢集团承公司炼铁部从事烧结工艺
技术管理工作,Email;260830500@qq.com 10
万方数据
Al,o, 1.73 0.50 1.90 2.19 1.19
P 0.037 0.011 0.097 0.071 0.059
0.185 0.053 0.034 0.017 0.009
烧损 2.18 1.50 5.74 5.00 1.50
%% 水分 9.23 9.00 7.95 7.46 1.60
上一章:非调质低焊接裂纹敏感性高强度钢板的发展现状 下一章:微铌处理550﹢MPa热轧带钢的工艺研究

相关文章

2500m3钒钛矿冶炼高炉炉前开口机优化研究 首钢京唐烧结配加阿特拉斯粉的试验 钒钛矿高炉炉前操作技术进步 钒钛矿高炉贮铁式主沟改造 钒钛矿高炉应对原料含钒变化的生产实践 2500m3高炉中钛渣钒钛矿操作技术进步 预拌混凝土中双掺粉煤灰和矿渣粉的研究与应用 石灰石粉代替部分生石灰生产钒钛烧结矿的研究与应用