您当前的位置:首页>论文资料>地震序列下拉索模数伸缩缝联间限位分析

地震序列下拉索模数伸缩缝联间限位分析

资料类别:论文资料

文档格式:PDF电子版

文件大小:1.7 MB

资料语言:中文

更新时间:2024-12-07 08:26:37



推荐标签:

内容简介

地震序列下拉索模数伸缩缝联间限位分析 第38卷第3期 2016年6月
土木建筑与环境工程
Journal of Civil,Architectural &. Environmental Engineering
doi;10.11835/j.issn.1674-4764.2016. 03. 005
Vol. 38 No. 3 Jun.2016
可O
地震序列下拉索模数伸缩缝联间限位分析
王建国,衰万城,高康,党新志
(同济大学土木工程防灾国家重点实验宝,上海200092)
摘要:主震作用下桥梁结构可能已发生联间相对变位,强余震作用将进一步加剧桥架上部结构的碰撞或落梁灾害,以某连续渠桥为例进行地震序列分析,并对比有无拉索模数伸缩缝两种情况下的地震响应,结果表明:拉索模数仲缩缝能够有效限制主余震各阶段联间相对位移,对避免主震后产生联间残余位移的桥案结构在强余震作用下发生碰捶、落巢具有重要意义主同时,拉索模数伸缩缝
使桥梁各联间协同作用,从而墩梁相对位移得到相应的控制,桥墩受力亦有所改善。关键词:地震序列;拉索模数仲缩缝;联间位移
中图分类号:U442.5;TU375
文献标志码:A
文章编号:1674-4764(2016)03-0035-06
CMEJs' effect in limiting relative displacement between girders
withexcitation of seismic sequence
WangJianguo,YuanWancheng,GaoKang,DangXinzhi
(State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University, Shanghai 200092, P. R. China)
Abstract:Residual displacement between girders would have occurred after the main shock. And it would get further destroy (like pounding and unseating) with the excitation of aftershocks. Conclusions draw from the comparation on the response of continuous bridge with or without Cablesliding expansion joints(CMEJs) under the excitation of seismic sequence. Relative displacement between girders gets effective restrained during the whole seismic process with the CMEJs which get great meaning for avoiding pounding and unseating. With the contribution of the CMEJs, all the girders work together causing the relative displacement between girder and the pile decreased. And the pier force also gets optimized.
Keywords:Seismic sequencet Cable-sliding modular expansion joints ((CMEJs); relative displacement between girders
收稿日期:2015-12-24
基金项目:国家自然科学基金(51478339、51278376、91315301);土本工程防灾国家重点实验室基金(SLDRCE14一B
14);江西省科技计划(20151BBG70064)
作者简介:王建国(1993-),男,主要从事桥梁抗震研,(E-mail)wjgnky@163.com,
袁万城(通信作者),男,教授.博士生导师,博士,(E-mail)yuantongji.edu.cn。
Received:2015-12-24
Foundation item: National Natural Science Foundation of China(No. 51478339,51278376, 91315301); Foundation of State
Key Laboratory for Disaster Reduction in Civil Engineering ( No. SLDRCE14-B-14); Foundation of Scientific Project for Jiangxi Province(No. 20151BBG70064)
Author brief: Wang Jianguo(1993-) ,main interest : aseismic of bridges, (E-mail)wjgnky@ 163. com
Yuan Wancheng(corresponding author) , professor, doctor supervisor, (E-mail) yuan@ tongji. edu, en.
上一章:固化污泥对渗滤液中氟阻滞作用的数值分析 下一章:管子加工车间工艺设计软件包的开发

相关文章

GB/T 31847-2015 电工电子设备机械结构模数序列及其应用 JTQX-2011-12-2 模数式伸缩装置通用技术条件 T/HNCAA 050-2023 多缝模数式公路桥梁伸缩装置变形性能试验规程 GB/T 19290.7-2021 发展中的电子设备构体机械结构模数序列第2-5 部分∶分规范25mm设备构体的接口协调尺寸各种设备用机柜接口尺寸 GB/T 19290.7-2021 发展中的电子设备构体机械结构模数序列 第2-5部分:分规范 25mm设备构体的接口协调尺寸 各种设备用机柜接口尺寸 GB/T 19290.6-2018 发展中的电子设备构体机械结构模数序列 第2-4部分分规范 25 mm设备构体的接口协调尺寸 适用于符合IEC 60297-3-100(19 in)机柜或机架的插箱或 GB/T 19290.6-2018 发展中的电子设备构体机械结构模数序列第2-4部分∶分规范 25mm设备构体的接口协调尺寸适用于符合IEC60297-子-100(19in)机柜或机架的插箱或机箱的适 FPSO限位作业中载荷分析及拖轮配置