您当前的位置:首页>论文资料>油气输送管线水合物沉积研究进展

油气输送管线水合物沉积研究进展

资料类别:论文资料

文档格式:PDF电子版

文件大小:5.48 MB

资料语言:中文

更新时间:2024-12-10 10:47:58



推荐标签:

内容简介

油气输送管线水合物沉积研究进展 · 3164 ·
综述与专论
化工进展
CHEMICAL INDUSTRY AND ENGINEERING PROGRESS
油气输送管线水合物沉积研究进展宋光春,李玉星",王武昌,姜凯,施政灼,赵鹏飞2
2017年第36卷第9期
("山东省油气储运安全省级重点实验室,中国石油大学(华东)、山东青岛266580:2中国石化集团新星石油
有限责任公司,北京100083)
摘要:水合物在油气输送管线内的沉积是导致管线堵塞的重要原因。本文调研了国内外水合物况积研究常用的实验装置,主要包括微机械力测量装置、接冕式反应圣和不同规模的实验环路。利用上述装置的实验研究及相关计算流体力学模拟研究共同表明,水合物颗粒的管线着床、水合物的管壁膜生长和水合物颗粒的管壁黏附是油气输送管线内水合物沉积的3种主要机理。水合物浓度过高、水合物颗粒粒径过大及管内流建过低是水合物颗粒着床沉积的主要原因。管壁和流体间存在温度梯度且管壁处过冷度较大时,水分子或气体分子由流体内部向管壁处的扩散是引发水合物膜生长沉积的根本原因。水合物颗粒与管壁间的毛细液桥力和范德华力是粘附沉积产生的主要原因。针对3美沉积机理,分别介绍了其沉积特性及相关况积模型。过冷度与水合物的沉积机理密切相关,因此可根据流体过冷度的大小对管线不同位置处的水合物沉积机理进行区分。沉积模型的完善及水
合物沉积特性与流体流动特性间的耦合对油气流动安全保障具有非常重大的意义,是未来研究的重点。关键调:水合物:沉积;着床:膜生长;粘附
中图分类号:TE88
文献标志码:A
DOI: 10.16085/j.issn.1000-6613.2017-0154
文章编号:1000-6613(2017)09-3164-13
Areview on hydrate deposition in oil and gas transmissionpipelines
SONG Guangchun',LI Yixing',WANG Wuchang',JIANG Kai',SHI Zhengzhuo',ZHAO Pengfei('Shandong Key Laboratory of Oil-Gas Storage and Transportation Safety, China University of Petroleum, Qingdao
266580, Shandong, China: 2 SINOPEC Star Petroleum Co., Ltd., Beijing 100083, China)
Abstract: Hydrate deposition is a main reason for the plugging in oil and gas transmission pipelines. This paper investigates the common experimental apparatus used for hydrate deposition research, including micromechanical force apparatus, rocking cells and flow loops of different scales. According to the researches performed using the apparatuses above and through computational fluid dynamics simulations, hydrate particle bedding, hydrate film growth and hydrate particle wall adhesion are identified to be the three mechanisms of hydrate deposition. High hydrate concentration, large hydrate particle size and low fluid velocity together lead to hydrate particle bedding. When there is a temperature gradient between the pipe wall and the bulk phase, gas molecules or water molecules tend to diffuse to the cooler pipe wall to form film growth deposition. The capillary liquid bridge force and the van der Waals force between hydrate particle and the pipe wall could count for adhesion deposition. For the three deposition mechanisms, deposition characteristics and deposition models were introduced respectively Hydrate deposition mechanisms are closely related to subcooling and they can besegregated depending
收稿日期:2017-01-22;修改稿日期:2017-03-01
基金项目:国家自燃科学基金(51006120)、中央高校基本科研业务费专项资金(14CX02207A,17CX06017,17CX05006)及中国石油大
学(华东)研究生创新工程(YCX2017062)项目。万方数据
第一作者:宋光春(1992一),男,博士研究生,主要从事深水流动安全保障方向研究.E-mail:UpcNGH_sgc@163.com.联系人:李玉星,博士,教投,主要从事油气储运工程方面的研究和教学工作, E-mail:lyxupc@163.com.
上一章:吴起油田管线防腐治理可行性方案探讨 下一章:化工管线振动有限元及其减振措施分析

相关文章

我国油气地面输送管线用钢发展概况 石油管线蜡沉积试验研究 T/CISA 244-2022 T/CSTE 0065-2022 质量分级及“领跑者”评价要求 油气输送管线用钢板和钢带 输油管线内气液固三相流中沙粒沉积规律的数值模拟研究 油气管线管理信息系统的研究 输油管线停待产期间气固液三相流中沙粒沉积规律的数值模拟研究 电加热对低温情况下重油管线输送的几点研究 中国油气储层研究图集 (卷四) 沉积构造