您当前的位置:首页>论文资料>不同制冷剂对喷射制冷系统性能的影响

不同制冷剂对喷射制冷系统性能的影响

资料类别:论文资料

文档格式:PDF电子版

文件大小:1.52 MB

资料语言:中文

更新时间:2025-01-15 08:24:41



推荐标签:

内容简介

不同制冷剂对喷射制冷系统性能的影响 2017年第9期(总第237期)
doi:10.3969/j. issn. 1009 3230.2017.09.009
应用能源技术
不同制冷剂对喷射制冷系统性能的影响
于文艳,郭振华,王海博
(内蒙古工业大学土木工程学院,呼和浩特010051)
摘要:选择R717、R290、R600a、R134a和R1234yf五种沸点相近的制冷工质,基于MAT-LAB软件,引入制冷剂物性参数的Cleland拟合模型,编写了喷射制冷系统的仿真模型,比较了五种制冷剂在不同冷冻水进口温度及不同冷却水进口温度下,喷射系数u和COP值的变化趋势。结果显示:冷冻水进口温度的改变,使制冷剂的制冷性能随之升高而增大;且制冷剂制冷性能随冷却水进口温度的升高而减小。R717在五种制冷剂中,喷射器喷射系数和系统性能COP 都是最大的,R1234yf和R134a则具有相近的喷射系数。
关键词:制冷剂;喷射制冷系统;COP
中图分类号:TU831.5文献标志码:B
文章编号:10093230(2017)090035-05
PerformanceAnalysisofRefrigerantsinJetRefrigerationSystem
YU Wen yan, GUO Zhen hua, WANG Hai bo
35
(College of Civil Engineering,Inner Mongolia University of Technology,Hohhot 010051, China) Abstract: Based on the MATLAB software, the Cleland fitting model of the physical parameters of the refrigerant was introduced, and the simulation model of the jet refrigeration system was prepared. Five kinds of refrigerants were compared with those of the refrigerant. Different chilled water inlet temperature and different cooling water inlet temperature, the injection coefficient u and COP -value of the trend. The results show that the change of the inlet temperature of the chilled water increases with the increase of the refrigeration performance of the refrigerant, and the refrigeration performance of the refrigerant decreases with the increase of the inlet temperature of the cooling water. R717 In the five refrigerants, the injector injection coefficient and system performance COP are the largest, R1234yf and R134a have a similar ejection coefficient.
Key words: Refrigerants; Ejector refrigeration system ; COP.
0引言
近些年来,随着温室效应、雾霾等环境问题的出现,解决能源危机迫在眉睫。喷射制冷系统以其特有的结构,不仅能够解决能源利用问题,且系统结构简单,运动部件少,越来越受到人们的关注。制冷剂作为制冷系统中的工作介质,其选择对喷射制冷系统的设计、运行及性能有重要意
收稿日期:20170527修订日期:2017-06-18 基金项目:内蒙古工业大学科学研究项目(X201612)
作者简介:于文艳(1973-),内蒙古工业大学土木工程
学院。
万方数据
义[1-3]。Wimolsiri[4]等采用异丁烷(R600a),基于TRNSYS和EES仿真软件,模拟分析了太阳能喷射制冷系统的性能。张于峰、赵薇[5]等建立喷射器的一维热力学模型,保证喷射器结构参数及运行工况不变的前提下,将R717、R290、R600a、 R134a和R152a应用在喷射制冷系统中,进行性能对比分析。李玉娜、刘艳军[6]则通过建立喷射制冷系统的简单模型,采用EES软件编程,分析了R11、R123、R141b、R134a、R152a、R600a和 R407C对系统性能的影响。王菲、李丹阳7]等根
上一章:工业以太网﹢PLC﹢现场总线在水处理的应用 下一章:鸡西盆地永庆组煤层的煤质特征及其变化规律

相关文章

过冷度对蒸气压缩式制冷循环性能的影响分析 回转式制冷压缩机内外压比不相等对性能影响的计算分析 高压水对纤维喷射混凝土性能的影响 钢纤维对喷射混凝土物理力学性能的影响 硅灰粉煤灰对喷射混凝土物理力学性能影响的试验研究 热处理对喷射成形GCr15轴承钢组织和性能的影响 石膏对不同水泥胶凝性能的影响 不同炭材料的掺杂对铅酸电池正极板性能的影响