您当前的位置:首页>论文资料>核安全级电缆耐LOCA工况能力的试验研究

核安全级电缆耐LOCA工况能力的试验研究

资料类别:论文资料

文档格式:PDF电子版

文件大小:234.51 KB

资料语言:中文

更新时间:2024-12-18 10:52:35



推荐标签:

内容简介

核安全级电缆耐LOCA工况能力的试验研究 第36卷第5期 2016年10月
核科学与工程
Nuclear Science and Engineering
Vol.36No.5
Oct.2016
核安全级电缆耐LOCA工况能力的试验研究
乌晓燕,钟志民
(国核电站运行服务技术有限公司,上海200230)
摘要:为保证核电厂安全可靠运行,要求核安全级电缆在整个寿期内能经受LOCA工况,执行安全相关功能。本文以绝缘电阻为指标,以我国已运行核电厂中使用较多的2个厂家制造的核安全级电绩为样品,分析比较了不同加速老化速率、不同累积热-辐照输人对电缆耐LOCA工况能力的影响。结果表明,不同厂商制造的电缆耐相同LOCA工况的能力存在差异:在一定的加速老化速率及累积能量输入范围内,老化速率、累积能量输人对电缆A耐LOCA工况的影响不明显;而累积能量输人对电缆B耐LOCA 工况能力的影响较明显。
关键调:电缆;设备鉴定;绝缘电阻;失水事故
中图分类号:TL48
文章标志码:A
文章编号:0258-0918(2016)05-0679-04
ResearchonsurvivalofLOCAofClass1Ecables
WUXiao-yan,ZHONGZhi-min
(State Nuclear Power Plant Service Company,Shanghai 200233,China)
Abstract: It is required that Classl E cable should throughout their normal lives be capable of operating through postulated environmental conditions resulting from a LOCA. Thermal-radiation simultaneous aging and loss of coolant accident testing were carried out on two cable samples of different manufactures, which are typically used in Chinese nuclear power plants. The effects of aging rates and integrated thermal and radiation dose inputs on the ability to survive LOCA were compared on the basis of insulation resistance. The results show that different cables behave differently under the same LOCA condition with the same energy inputs. For cable A,the accident performance of cables with different aging rates and energy inputs are not significantly different. While for cable B,the integrated energy inputs might determine the survival ofLOCA.
Key words: Cable; Equipment qualification; Insulation resistance; Loss of coolant accident
修日期:2016-05-27
基金项目:国家科技重大专项(2013ZX06005006);国家科技重大专项(2011ZX06004002)作者简介:乌晓(1983一),女,工程师,碳士,现主要从事核电厂老化管理工作
679
上一章:中国实验快堆一回路钠循环泵振动特性分析 下一章:钠冷快堆燃料破损定位方法综述

相关文章

核安全1级设备线型支承分析方法研究 数字化核安全级仪控系统软件的验证与确认 GB/T 17737.106-2018 同轴通信电缆第1-106部分∶电气试验方法电缆护套的耐电压试验 GB/T 17737.105-2018 同轴通信电缆第1-105部分∶电气试验方法电缆介质的耐电压试验 GB/T 17737.105-2018 同轴通信电缆 第1-105部分:电气试验方法 电缆介质的耐电压试验 GB/T 17737.106-2018 同轴通信电缆 第1-106部分:电气试验方法 电缆护套的耐电压试验 NB/T 20366-2015 核电厂核级石墨密封垫片试验方法 核动力装置净化核级离子交换树脂选型研究