您当前的位置:首页>论文资料>油藏条件下聚合物溶液老化数学模型新探

油藏条件下聚合物溶液老化数学模型新探

资料类别:论文资料

文档格式:PDF电子版

文件大小:2.41 MB

资料语言:中文

更新时间:2024-12-26 09:59:34



推荐标签:

内容简介

油藏条件下聚合物溶液老化数学模型新探 第38参第4期 2016年7月
石油钻采工艺
OIL DRILLING & PRODUCTION TECHNOLOGY
文章编号:1000-7393(2016)04-0499-05
DOI:10.13639/j.odpt.2016.04.018
Vol.38 No. 4 July2016
油藏条件下聚合物溶液老化数学模型新探
李俊键】姜汉桥!陆祥安?赵玉云】常元昊【王依诚
1.中国石油大学(北京)石油工程教育部重点实验宝;2.南京工业大季生物与制药工程学院
引用格式:李俊键,姜汉桥,陆祥安,赵玉云,常元昊,王依诚.油藏条件下聚合物溶液老化数学模型新探[】.石油钻采工艺,2016,384):499-503,544
利用油藏数值模拟技术评估聚合物老化降解对驱替
揭要:聚合物老化降解是影响高温油藏中聚合物驱效果的重要因素。
效聚影响的技术关键在于聚合物老化降解数学模型的建立。基于聚合物老化降解的黏度一阶常微分方程建立了油藏条件下的轨度修正模型,给出了油藏条件下聚合物黏度变化的偏斌分方程猫述形式。结合聚合物质量守位方程,证明了在黏流关系是多项式关系的条件下,黏度修正模型是成立的。黏度修正模型揭示了油藏中任意一点聚合物黏度受到聚合物自身降解和流动两方面影响的过程,描述了聚合物老化降解过程中质量流度不变,黏度降低的物理现象,比日前商业数值模拟器中的黏度模型更加贴近聚合物在多孔介质中流动的物理实际。修正黏度模型的推导与论证为聚合物老化降解的数值模拟研究提供了理论支持
关键词:聚合物驱;聚合物老化;黏度修正模型;油藏数值模拟
中图分类号:TE357.46
文献标识码:A
A new mathematical model forpolymer solution aging at reservoir conditions
LI Junjian', JIANG Hanqiao', LU Xiang'an', ZHAO Yuyun', CHANG Yuanhao', WANG Yicheng
1. Key Laboratory of Petrolerm Engineering Edication Mintisry, China University of Perolewm (Bejing), Bejing 102249, China
2. College of biofechnology and Pharmaceartical Engineering, Nanjing Tech University, Nanjing, Jiangsu 211816, Chind
Citation: LI Junjian, JIANG Hanqiao, LU Xiang"an, ZHAO Yuyun, CHANG Yuanhao, WANG Yicheng. A new mathematical(o[osd
Abstract: Polymer aging and degradation is an important factor influencing the effect of polymer flooding in high-temperature oil reservoirs. When the effect of polymer aging and degradation on flooding effect is evaluated by means of reservoir numerical simulation, it is critical to establish the mathematical model for polymer aging and degradation. The viscosity correction model at reservoir condi-tions was built by using the first-order ordinary differential equation of polymer aging and degradation. Then, the partial differential equation for describing the variation of polymer viscosity at reservoir conditions was presented. Combined with the mass conservation cquation of polymer, it is proved that the viscosity correction model is feasible if the viscosity-concentration relation is polynomial The viscosity correction model reveals the influential process of degradation and flowing of polymer on its viscosity at any point of oil reservoir, and describes the physical phenomenon of viscosity reduction with constant mass concentration in the process of polymer ag ing and degradation. Compared with the viscosity models used in current commercial numerical simulators, this model can present the physical flowing of polymer in porous media more actually. The derivation and demonstration of viscosity correction model provides the theoretical support for the numerical simulation study of polymer aging and degradation.
Key words: polymer flooding; polymer aging; viscosity correction model; reservoir numerical simulation
发展计划(“973"计划)“致密油高效开发油赢工程理论与方法研究"(端号:2015CB250900)
第一作者:李俊键(1983-),讲师,主要从事油气藏开发方面的研究。通试地址:(102249)北京市昌平区府学路18号。电话:010
89732163。E-mail; junjian@petrochina.com.cn
上一章:普光水平井投产一体化管柱及参数优化 下一章:稠油蒸汽吞吐逐级深部封窜及乳化降黏复合技术

相关文章

GB/Z 28820.4-2022 聚合物长期辐射老化 第4部分:辐射条件下不同温度和剂量率的影响 GB/Z 28820.2-2012 聚合物长期辐射老化 第2部分:预测低剂量率下老化的程序 侧顶复吹条件下AOD转炉熔池内流体流动的数学模拟:模型对纯侧吹过程的应用及结果 侧顶复吹条件下AOD转炉熔池内流体流动的数学模拟:模型对纯顶吹过程的应用及结果 侧顶复吹条件下AOD转炉熔池内流体流动的数学模拟:模型对侧顶复吹过程的应用及结果 氯化橡胶涂层人工加速条件下的老化机理 GB/T 40278-2021 纸和纸板加速老化(光照条件下) GB/T 40278-2021 纸和纸板 加速老化(光照条件下)